Array
(
[0] => WP_Post Object
(
[ID] => 1049
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Alpine RO Rotoplex Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-ro-rotoplex-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-22 02:39:05
[post_modified_gmt] => 2021-05-22 06:39:05
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[1] => WP_Post Object
(
[ID] => 1062
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Micron Pulvis Agitating Media Mill
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => micron-pulvis-air-classifying-mill
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-22 02:38:56
[post_modified_gmt] => 2021-05-22 06:38:56
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 20
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[2] => WP_Post Object
(
[ID] => 1066
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] => With Alpine High Pressure Roller Mill products are produced with a precipitous granule distribution. The high pressure roller crusher is also called roller crusher or roller press.
The significant difference of high pressure roller grinding compared with compaction is that the press forces between the rollers are lower because no new adhesive forces need to be created.
The mill feed is transported to the most narrow gap by the counter rotating rollers through friction effects. Both rollers are pressed against each other using hydraulics. This milling force is transferred to the mill feed. Through selective contact of the individual granules are created at extremely high inner tensions which lead to fractures.
The use of the optimal milling force leads to compact mills with extremely low energy requirements. Because only the outer particles of the material bed have contact with the surface of the rollers, milling that is almost contamination-free is possible.
High Pressure Roller Mills are used in the cases of medium-fine crushing of hard materials such as ceramics, minerals from 5 up to 9 on the Moh's hardness scale, metals and metal alloys. High Pressure Roller Mills are used in continuous operation or in a closed circuit with screening machines or classifiers.
[post_title] => Alpine High Pressure Roller Mill
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-high-pressure-roller-mill
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-18 17:32:35
[post_modified_gmt] => 2021-05-18 21:32:35
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 15
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[3] => WP_Post Object
(
[ID] => 1050
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Alpine CL Series Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-cl-series-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2020-10-30 17:53:19
[post_modified_gmt] => 2020-10-30 21:53:19
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[4] => WP_Post Object
(
[ID] => 1040
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Micron Xerbis Agitated Media Flash Dryer
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => micron-xerbis-agitated-media-flash-dryer
[to_ping] =>
[pinged] =>
[post_modified] => 2020-10-29 11:57:39
[post_modified_gmt] => 2020-10-29 15:57:39
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[5] => WP_Post Object
(
[ID] => 1095
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Alpine Pharmapaktor APC L
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-pharmapaktor-apc-l
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-19 17:09:13
[post_modified_gmt] => 2021-05-19 21:09:13
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[6] => WP_Post Object
(
[ID] => 1037
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] => Shurfeed™ cutting chamber design allows material to
fall directly in front of the rotating knives and to be pulled quickly
through the cutting action for fast, complete granulation without piece
bounce and flyback. Three steep angle rotor knives and two bed knives
mounted in Double Angle Cut™ configurations reduce energy consumption, noise, heat and fines, while increasing throughput.
Shurfeed® cutting chamber design allows material to fall directly in
front of rotating knives to be pulled quickly through the cutting
action for fast, complete granulation without piece bounce and
flyback. Only Polymer Systems gives a clear, unobstructed feed opening
equal to rotor diameter for maximum performance through every inch of
the cutting circle. This unique design maximizes granulator capacity,
eliminates bottlenecks at the entrance to the cutting chamber and
dramatically increases effective screen area for fast throughput. Ask
for a comparison!
[post_title] => Polymer Systems Shurfeed 2000 Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => polymer-systems-shurfeed-2000-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2020-10-25 13:34:43
[post_modified_gmt] => 2020-10-25 17:34:43
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[7] => WP_Post Object
(
[ID] => 1044
[post_author] => 1
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Polymer Systems Premium Shurfeed Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => polymer-systems-premium-shurfeed-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2020-04-09 14:27:03
[post_modified_gmt] => 2020-04-09 14:27:03
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[8] => WP_Post Object
(
[ID] => 1038
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Alpine Picoline
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-picoline
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-12 10:27:13
[post_modified_gmt] => 2021-05-12 14:27:13
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 18
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[9] => WP_Post Object
(
[ID] => 1054
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] => The grinding air is injected tangentially via Laval nozzles in the nozzle ring into the machine. This causes a spiral jet of air to form in the grinding zone, from which the mill derives its name. A high pressure forms in the mill as a result of the spiral flow of air that can rise to 1 bar overpressure in operation without product. The integrated injector is charged with compressed air which ensures that the product is conveyed into the machine against the overpressure present in the machine. This, however, is associated with a considerable compressed air consumption, which can be as much as 30% of the total grinding air requirement.
The feed product circulates close to the nozzle ring and is thus intercepted repeatedly by the air jets exiting the nozzles. Comminution is the result of inter-particle collision caused by the particles flowing at different speeds in the nozzle jet. Comminuted material is conveyed along with the air to the discharge, the spiral flow subjects the particles to a classification: only fine particles are discharged, coarse particles remain in the mill.
Alpine® AS Spiral Jet Mills are characterized by a special geometry of the mill housing in the area of the discharge, which contributes towards a finer classification effect and a sharp top cut.
The product also has an effect on the air flow within the machine: the more product there is in the machine, the more the spiral flow is braked and the lower is the centrifugal force and the coarser the end product. The relationship of the product to the classifying air flow rate is therefore the most significant parameter for setting the fineness of the spiral jet mill. In principle, different nozzle angles can also be used to achieve the required fineness values, whereby the complete nozzle ring must be exchanged in this case.
[post_title] => Alpine AS Spiral Jet Mill
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-as-spiral-jet-mill
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-12 17:01:59
[post_modified_gmt] => 2021-05-12 21:01:59
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 16
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[10] => WP_Post Object
(
[ID] => 1045
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Polymer Systems Large Part Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => polymer-systems-large-part-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2020-10-28 12:39:36
[post_modified_gmt] => 2020-10-28 16:39:36
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[11] => WP_Post Object
(
[ID] => 1061
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] => Mikro ACM® Air Classifying Mills were invented by HMPS in the late 1960’s and are one of the most versatile types of size reduction equipment available in the market. These units while being capable of producing fine, medium and coarse grinds for a wide variety of materials for Food, Pharmaceutical, Chemical and Mineral industries, require very little maintenance over their life span. The basic design of these mills is the impact size reduction that is coupled with an internal dynamic classifier which controls the outlet (product) particle size via recirculating the coarse particles back into the grinding zone.
There are seven main factors which determine particle size distribution for the Mikro ACM® Air Classifying Mill. When varied, the rotor type and speed combined with the liner and hammer count affects the production of fines. The separator type and speed affects the top size of the product. And lastly, the airflow governs the throughput as well as top size and fines generation. With the endless available options a machine can be configured to process just about any material that is below MOH’s hardness of 5.
[post_title] => Mikro ACM® Air Classifying Mill
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => mikro-acm-air-classifying-mill
[to_ping] =>
[pinged] =>
[post_modified] => 2021-07-29 11:28:37
[post_modified_gmt] => 2021-07-29 15:28:37
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 4
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[12] => WP_Post Object
(
[ID] => 1060
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] => The Mikro Atomizer® Air Classifying Mill uses air flow to convey materials to the grinding zone. Size reduction occurs when hammers fitted to the rotor impact particles at 4,000 to 8,000 RPMs. A deflective liner returns oversized particles to the hammer impact zone for further reduction. The ground materials are then conveyed to the classifier wheels which are mounted to the grinding rotor. Larger particles are rejected for regrinding as the desired particles are air conveyed by internal fan blades and exit the mill for collection.
[post_title] => Mikro Atomizer® Air Classifying Mill
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => mikro-atomizer-air-classifying-mill
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-03 11:59:08
[post_modified_gmt] => 2021-05-03 15:59:08
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 3
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[13] => WP_Post Object
(
[ID] => 1043
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Polymer Systems Press Side Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => polymer-systems-press-side-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2021-07-30 12:58:52
[post_modified_gmt] => 2021-07-30 16:58:52
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[14] => WP_Post Object
(
[ID] => 1076
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] => The Mikro® Classifier is characterized by its optimized cyclone-classifier principle. Because of the optimized flow pattern and the use of a high-efficiency classifying wheel, the Mikro® Classifier is especially suitable for ultrafine classifying operations in in-line mode.
The feed product is fed tangentially to the top of the classifier. The classifying wheel separates the feed product into a coarse fraction and a fines fraction. The classifying air and the fines pass through the
classifier wheel, whereas the coarse material settles on the housing wall. A flow of secondary air introduced tangentially above the product discharge recirculates any unclassified material to the classifying wheel for renewed classification, whereby agglomerates are dispersed and the material is then distributed uniformly in the classifying zone. The optimized classifying wheel geometry results in a high product yield at an extremely high precision of cut. In addition, the low pressure drops result in low energy consumption and correspondingly lower operating costs.
The Mikro® Classifier was designed for all types of fine to medium-fine products. It is especially suitable for powder coating classification aimed at reducing the ultrafine portion under 5 – 10 µm.
[post_title] => Mikro® CC Air Classifier
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => mikro-classifier
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-22 02:46:44
[post_modified_gmt] => 2021-05-22 06:46:44
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[15] => WP_Post Object
(
[ID] => 1046
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Polymer Systems Hot Melt Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => polymer-systems-hot-melt-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-22 02:46:00
[post_modified_gmt] => 2021-05-22 06:46:00
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[16] => WP_Post Object
(
[ID] => 1093
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] => The wet material is fed through customized feeding systems into the grinding and drying section of the dryer's main body. The grinding rotor disperses the wet material into very fine particles and the fine particles are fluidized in the grinding chamber by temperature-controlled, hot gas coming in from the air heater.
The hot air (or inert gas) can be heated up to 650 °C and as the wet product is dispersed, it is reduced in size in the bottom section of the dryer. The system is kept under a negative pressure by the exhaust fan and the surface area of the product is increased enormously so that water (or other solvents) is evaporated instantaneously.
The dry and fine particles are conveyed with the gas stream to the top section of the dryer where a separator classifies the particles by size. Then the particles pass the classifier at the set cut point and are conveyed with the exhaust air to a powder air separating system like the cyclone, cyclone filter or cyclone scrubbers.
The Micron Dryer flash dryer retains a fluidized bed of product in the drying chamber to ensure a low level of adhesion of wet material on the inside wall of the drying chamber. Moreover, process parameters like classifier speed and outlet temperature can be adapted to control moisture content and particle size of the end product.
[post_title] => Micron Drymeister Flash Dryer
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => micron-drymeister-flash-dryer
[to_ping] =>
[pinged] =>
[post_modified] => 2020-10-28 12:41:29
[post_modified_gmt] => 2020-10-28 16:41:29
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
)
