Array
(
[0] => WP_Post Object
(
[ID] => 1049
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
| Model |
|
40 / 63 |
50 / 80 |
63 / 100 |
80 / 160 |
125 / 125 |
| Drive Standard |
HP |
50 |
75 |
100 |
200 |
250 |
| Throughput |
Lbs/Hr |
1,100 |
2,200 |
3,300 |
6,500 |
11,000 |
| Rotor Speed |
RPM |
660 |
550 |
525 |
350 |
250 |
| Rotor Knives |
Number |
4 |
5 |
6 |
8 |
12 |
| Bed Knives |
Number |
3 |
4 |
5 |
6 |
9 |
| Weight |
Lbs |
5,600 |
6,800 |
14,000 |
24,800 |
28,000 |
[post_title] => Alpine RO Rotoplex Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-ro-rotoplex-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2026-06-01 10:42:22
[post_modified_gmt] => 2026-06-01 14:42:22
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[1] => WP_Post Object
(
[ID] => 1059
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] => The Mikro Bantam® Hammer and Screen Mill is part of the original Mikro Pulverizer® Hammer & Screen Mill product line that was introduced in 1923. Today, with over 4,000 installations, these mills are the standard throughout the world for processing powder coatings, propellants, foods, pharmaceuticals, chemicals, pigments, industrial minerals and plastics.
[post_title] => Mikro Bantam
® Hammer & Screen Mill
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => mikro-bantam-hammer-and-screen-mill
[to_ping] =>
[pinged] =>
[post_modified] => 2026-06-11 14:44:52
[post_modified_gmt] => 2026-06-11 18:44:52
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 6
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[2] => WP_Post Object
(
[ID] => 1066
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] => With Alpine High Pressure Roller Mill products are produced with a precipitous granule distribution. The high pressure roller crusher is also called roller crusher or roller press.
The significant difference of high pressure roller grinding compared with compaction is that the press forces between the rollers are lower because no new adhesive forces need to be created.
The mill feed is transported to the most narrow gap by the counter rotating rollers through friction effects. Both rollers are pressed against each other using hydraulics. This milling force is transferred to the mill feed. Through selective contact of the individual granules are created at extremely high inner tensions which lead to fractures.
The use of the optimal milling force leads to compact mills with extremely low energy requirements. Because only the outer particles of the material bed have contact with the surface of the rollers, milling that is almost contamination-free is possible.
High Pressure Roller Mills are used in the cases of medium-fine crushing of hard materials such as ceramics, minerals from 5 up to 9 on the Moh's hardness scale, metals and metal alloys. High Pressure Roller Mills are used in continuous operation or in a closed circuit with screening machines or classifiers.
[post_title] => Alpine High Pressure Roller Mill
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-high-pressure-roller-mill
[to_ping] =>
[pinged] =>
[post_modified] => 2026-06-11 14:52:35
[post_modified_gmt] => 2026-06-11 18:52:35
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 15
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[3] => WP_Post Object
(
[ID] => 1050
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
| Model |
|
45 / 100 CL |
60 / 140 CL |
80 / 170 CL |
90 / 200 CL |
| Throat Size at Chamber |
Inches |
18 x 40 |
24 x 55 |
32 x 67 |
36 x 79 |
| Throughput |
Lbs/Hr |
1,000 |
3,000 |
5,000 |
8,000 |
| Motor |
HP |
60-100 |
100-150 |
150-200 |
350-400 |
| Cutting Circle Diameter |
Inches |
18 |
24 |
32 |
36 |
| Bed Knives |
Number |
4 / 2 |
6 / 2 |
8 / 2 |
10 / 3 |
| Weight |
Lbs |
12,500 |
16,000 |
20,800 |
24,000 |
[post_title] => Alpine CL Series Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-cl-series-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2026-06-03 16:42:41
[post_modified_gmt] => 2026-06-03 20:42:41
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[4] => WP_Post Object
(
[ID] => 1139
[post_author] => 2
[post_date] => 2016-08-31 07:17:30
[post_date_gmt] => 2016-08-31 07:17:30
[post_content] =>
[post_title] => Micron Labomixer LV 1.5 liter mixer
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => micron-labomixer-lv-1-5-liter-mixer
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-22 02:34:18
[post_modified_gmt] => 2021-05-22 06:34:18
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[5] => WP_Post Object
(
[ID] => 1095
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Alpine Pharmapaktor APC L
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-pharmapaktor-apc-l
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-19 17:09:13
[post_modified_gmt] => 2021-05-19 21:09:13
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[6] => WP_Post Object
(
[ID] => 1038
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Alpine Picoline
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-picoline
[to_ping] =>
[pinged] =>
[post_modified] => 2026-08-13 14:35:57
[post_modified_gmt] => 2026-08-13 18:35:57
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 18
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[7] => WP_Post Object
(
[ID] => 1054
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
The grinding air is injected tangentially via Laval nozzles in the nozzle ring into the machine. This causes a spiral jet of air to form in the grinding zone, from which the mill derives its name. A high pressure forms in the mill as a result of the spiral flow of air that can rise to 1 bar overpressure in operation without product. The integrated injector is charged with compressed air which ensures that the product is conveyed into the machine against the overpressure present in the machine. This, however, is associated with a considerable compressed air consumption, which can be as much as 30% of the total grinding air requirement.
The feed product circulates close to the nozzle ring and is thus intercepted repeatedly by the air jets exiting the nozzles. Comminution is the result of inter-particle collision caused by the particles flowing at different speeds in the nozzle jet. Comminuted material is conveyed along with the air to the discharge, the spiral flow subjects the particles to a classification: only fine particles are discharged, coarse particles remain in the mill.
Alpine® AS Spiral Jet Mills are characterized by a special geometry of the mill housing in the area of the discharge, which contributes towards a finer classification effect and a sharp top cut.
The product also has an effect on the air flow within the machine: the more product there is in the machine, the more the spiral flow is braked and the lower is the centrifugal force and the coarser the end product. The relationship of the product to the classifying air flow rate is therefore the most significant parameter for setting the fineness of the spiral jet mill. In principle, different nozzle angles can also be used to achieve the required fineness values, whereby the complete nozzle ring must be exchanged in this case.
[post_title] => Alpine AS Spiral Jet Mill
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-as-spiral-jet-mill
[to_ping] =>
[pinged] =>
[post_modified] => 2021-05-12 17:01:59
[post_modified_gmt] => 2021-05-12 21:01:59
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 16
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[8] => WP_Post Object
(
[ID] => 1045
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
| Model |
|
1624 |
1632 |
| Throat Size at Chamber |
Inches |
16 x 24 |
16 x 32 |
| Screen Area |
Sq. Inches |
564 |
750 |
| Motor |
HP |
25 – 30 |
30 – 40 |
| Cutting Circle Diameter |
Inches |
16 |
16 |
| Rotor Knives |
Number |
3 |
3 |
| Bed Knives |
Number |
1 |
1 |
| Weight – SPL / SIL |
Lbs |
2,200 / 2,220 |
2,500 / 2,530 |
| Throughput |
Lbs/Hr |
900 |
1,100 |
[post_title] => Polymer Systems Large Part Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => polymer-systems-large-part-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2026-06-01 10:34:07
[post_modified_gmt] => 2026-06-01 14:34:07
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[9] => WP_Post Object
(
[ID] => 1043
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
| Model |
|
912 |
1116 |
1120 |
| Throat Size at Chamber |
Inches |
9 x 12 |
11 x 16 |
11 x 20 |
| Screen Area |
Sq. Inches |
190 |
297 |
373 |
| Motor** |
HP |
7.5 – 10 |
10 – 15 |
15 – 20 |
| Cutting Circle Diameter |
Inches |
10.3 |
12.5 |
12.5 |
| Rotor Knives |
Number |
2/3 |
2/3 |
2/3 |
| Bed Knives |
Number |
1 |
1 |
1 |
| Weight – SPL / SIL |
Lbs |
1,050 / 1,200 |
1,500 / 1,800 |
1,600 / 2,200 |
| Throughput*** |
Lbs/Hr |
400 |
500 |
650 |
| Bin Capacity |
Cubic Feet |
3.6 |
3.6 |
6.2 |
[post_title] => Polymer Systems Press Side Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => polymer-systems-press-side-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2026-06-01 10:26:21
[post_modified_gmt] => 2026-06-01 14:26:21
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[10] => WP_Post Object
(
[ID] => 1074
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] => As requirements in the pharmaceutical industry continue to ask for tighter particle distributions, additional steps such as on-line classification may be required. The Mikro® Acucut Air Classifier utilizes dual stage operating controls to ensure sharp cuts and narrow band particle size distributions typically below the 10 micron range. This permits control of maximum and minimum particle size diameters with unparalleled accuracy. With precise control of the air flow and rotor speeds this unit will produce the same sharp cuts each time, every time. The high energy dispersion also ensures that the maximum percentage of fines is reclaimed. Easily operated, cleaned and maintained, the Mikro® Acucut Air Classifierr keeps downtime to a minimum.
Options are available for effective control of product contamination, protection against corrosion, handling abrasive materials and classifying adhesive powders. The Mikro® Acucut Air Classifier is ideal for chromatography materials, alumina, silica, toner and metal powders. Extremely high dispersive energy applied to the process material ensures unparalleled yields even with sticky and difficult to disperse products.
The Mikro® Acucut Air Classifier is a forced vortex unit designed to disperse, then classify fine particles into coarse and fine fractions. High energy dispersing air enters the rotor radially around the entire outer edge. Feed material enters this dispersion air zone through an inlet in the rotor ring. Particles are acted upon by centrifugal and drag forces. Air carries the dispersed fines inward to the central fractions outlet, coarse move outward to the rotor periphery. Cut points are adjusted by airflow, rotor speed or both.
[post_title] => Mikro® Acucut Air Classifier
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => mikro-acucut-air-classifier
[to_ping] =>
[pinged] =>
[post_modified] => 2026-06-11 14:59:48
[post_modified_gmt] => 2026-06-11 18:59:48
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[11] => WP_Post Object
(
[ID] => 1078
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
[post_title] => Alpine Ventoplex Air Classifier
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => alpine-ventoplex-air-classifier
[to_ping] =>
[pinged] =>
[post_modified] => 2026-06-11 15:00:35
[post_modified_gmt] => 2026-06-11 19:00:35
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[12] => WP_Post Object
(
[ID] => 1046
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
| Model |
|
1010 |
| Throat Size at Chamber |
Inches |
10 x 10 |
| Screen Area |
Sq. Inches |
240 |
| Motor |
HP |
7.5 – 10 |
| Cutting Circle Diameter |
Inches |
10 |
| Rotor Knives |
Number |
3 |
| Bed Knives |
Number |
2 |
| Weight – SPL / SIL |
Lbs |
675 |
| Throughput |
Lbs/Hr |
300 |
[post_title] => Polymer Systems Hot Melt Granulator
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => polymer-systems-hot-melt-granulator
[to_ping] =>
[pinged] =>
[post_modified] => 2026-06-01 10:36:48
[post_modified_gmt] => 2026-06-01 14:36:48
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
[13] => WP_Post Object
(
[ID] => 1093
[post_author] => 2
[post_date] => 2015-01-06 10:52:36
[post_date_gmt] => 2015-01-06 10:52:36
[post_content] =>
Benefits
- Continuous drying, milling and classifying in a single compact system
- Safe drying of temperature-sensitive products — even at elevated temperatures
- Produces ultra-fine, uniform powders in just seconds
- Handles moist solids with up to 80% moisture content — including slurries, pastes, doughs, filter cakes and wet powders
- High evaporation capacity and fast thermal transfer
- 30–40% lower energy consumption per kg of evaporated water compared to conventional drying technologies
- Small footprint and excellent accessibility for inspection and cleaning
Rotor Types
Hosokawa Flash Dryers are available with a choice of three rotor types, selected according to product characteristics and specific process goals. Each rotor offers distinct advantages to suit a wide range of applications:
- DMR Rotor
A high-speed multi-blade rotor designed for strong dispersion, generating a powerful air vortex with tip speeds of up to 110 m/s. Ideal for maximum dispersing performance.
- MDH Rotor
A horizontally driven rotor with swinging hammers for intensive grinding. Recommended for processing slurries and pastes requiring strong milling.
- MDV Rotor
A vertically driven grinding rotor that gently disperses wet agglomerates and solids. Suited for mild dispersion and grinding of heat-sensitive products.
[post_title] => Micron Drymeister Flash Dryer
[post_excerpt] =>
[post_status] => publish
[comment_status] => closed
[ping_status] => closed
[post_password] =>
[post_name] => micron-drymeister-flash-dryer
[to_ping] =>
[pinged] =>
[post_modified] => 2026-06-04 13:18:18
[post_modified_gmt] => 2026-06-04 17:18:18
[post_content_filtered] =>
[post_parent] => 0
[guid] =>
[menu_order] => 0
[post_type] => hm-products
[post_mime_type] =>
[comment_count] => 0
[filter] => raw
)
)
