Mikro Pulverizer Liner Replacement

The Mikro Pulverizer Hammer and Screen Mill is an efficient mechanical mill designed for refinement and size reduction. It is capable of processing a range of materials, from chemicals like ammonium sulfate to food items like cinnamon and black pepper, and is capable of reducing the size of these materials to as little as 50 microns.

Changing the Multiple Deflector Liner

However, the Mikro Pulverizer Hammer and Screen Mill will not work efficiently if the machine is not maintained. This includes, but is not limited to, periodic replacement of the multiple deflector liner. As material passes through the Mikro Pulverizer, the hammers impact the multiple deflector liner, and the material is caught in between the hammers and the liner. This pulverizes the material, reducing its size. An unmaintained liner may result in a reduction in processing capacity. If a reduction in processing capacity is observed, then be sure to replace the multiple deflector liner, as a reduction of processing capacity could mean a drastic increase in the amount of time required to process the material.

The video on the left shows the proper instructions for removing and replacing multiple deflector liner. Be sure to follow all necessary safety precautions, such as proper eye, ear and skin protection, along with all lock-out tag-out procedures.

Important notes on liner replacement:

  1. It is important that the liner is installed with the correct orientation. The tapered side of the liner should be installed toward the in-feed side of the cover.
  2. All bolts should be installed from the liner side, through the cover.
  3. The machine bolts are used to allow for variants in the liner radius, but after the liner is completely tightened and positioned, it is recommended that the extra bolt threads be removed.